The experts in lubrication technology
MWM
Air+oil mixer with optical monitoring and outlets manometers
Type: MVF-AX You must be registered to see the leaflet

The mixer is made up of 3 parts: the first one to mix air and oil, the second to monitor the flow with Oil Streak Sensor and the third one for the outlets and the air pressure monitoring. The oil is metered in very small quantity and carried by a continuous air flow outside of the mixer. Fit for minimal quantity lubrication (MQL) in high speed spindle bearings and in any case where monitored MQL is needed.

Data Sheet

Lubricant: mineral or synthetic oil
Viscosity: ISO VG from 22 to 320
Operating oil pressure: min. 20 ÷ max. 30 bar
Operating air pressure: min 0,5 ÷ max. 6 bar
Post de-aeration installation: horizontal or vertical
Operating temperature: +10 ÷ +45 [°C]
Material: Aluminium and transparent policarbonate
Electrical data optical sensor IFX-S08 :
Output circuit: PNP
Connection: male round connector M8, 4 poles
Operating voltage: 10÷30 VDC
Load current: <15%
Protection class: IP67

DEALERS IN THE WORLD

MWM NEWS

26 April 2021

The MWM Air+Oil lubrication system is used for the protective lubrication of the master gear, which can have different tooth widths.

10 March 2021

For applications in industrial plants, in oil mist systems, where it is necessary to control the lubricant quantity supplied to the lubrication points.